Our Pro road hubs are for those looking for a lighter weight option. For the Pro model of our road hub we replace the stainless steel axle and end caps found in our Classic hub with anodized US-produced 7075 aluminum parts. This results in a 34% drop in weight (depending on hub configuration) when compared to our Classic hub.
Our Pro rear road hubs are available in 20, 24, 28 and 32 spoke hole configurations (other spoke hole count options are available upon request). We also offer our rear road hub with 2 bearing options: Standard Phil spec bearings which have full contact seals and have a 100% fill with our Phil Waterproof grease. Carbonyte Phil spec bearings are our low drag bearing option which have partial contact seals and have a 30% fill with our full synthetic Phil Carbonyte grease. Our 11-speed cassette hubs come with a spacer so you can run a 8, 9 or 10 speed cassette.
** PLEASE CONTACT US FOR AVAILABILITY **
| SPECIFICATIONS | |
|---|---|
| Hub shell material | 6061 Aluminum |
| Axle material | 7075 Aluminum |
| Body material | 7075 Aluminum with hard anodize coating |
| Pawl material | Stainless steel (heat-treated) |
| End cap material | 7075 Aluminum |
| Rear hub width | 130 mm |
| Axle diameter | 15 mm |
| Cassette mechanism | 5 double row pawls / 40 tooth ratchet ring |
| Cassette compatibility | Shimano 8, 9, 10 and 11-Speed |
| Bearing availability | 6902 (Standard), 6902 (Carbonyte) |
| Rear hub weight | 331 grams |
| Rider and bike weight limit | 190 lbs / 86 kgs |
| Materials | All of our manufactured items are machined out of US-produced materials. |
| HUB DIMENSIONS | |
| Axle length | 130 mm |
| Left side flange diameter | 59 mm |
| Right side flange diameter | 59 mm |
| Left side flange to center | 34 mm |
| Right side flange to center | 16 mm |
INSTRUCTIONS
